5.8G 5700-5900MHz RF PA Module for Phone Shielding and Anti-Drone Systems Customizable Power

Actually runs pretty much across the whole 5700-5900MHz band we're talking about here, and we've had buyers use it for both drone jamming and phone shielding setups—it's one module that handles both, which saves you form stacking separate units.

Power is 100W on this model but we can adjust it down if you need less, and the 28V supply is pretty standerd for these systems so you won't be hunting for exotic power gear (input range is roughly 24-30V so you've got some wiggle room there).

Protection features actually matter a lot here: tempearture alarm kicks in at 85°C and VSWR shuts it down before antenna mismatch cooks the transistors, something we see a lot in cheaper modules that skip this.

Customiztion takes about 20 days or so from first order, and for that first run we usually suggest you send us a frequency sweep you want—common mod is dropping it to 10W with tighter bandwidth, but teh 100W spec gives you more headroom.

Serial control is more common for rack setups, parallel mode is easier if you're using a simple microcontroller, and we've included both in pinout so you're not locked into one interface.

Not ideal for handheld devices though—the 220mm board is too big for that, and anyone mounting it indoors should stick with good heatsink because of that it runs warm under full load.