Account
Inquiry
Actually moves loads up to 10 tons with a 200mm lift height, which is enough for most standard pallets without overcomplicating hydraulic system — we've tested it with 8-ton loads consistently and it holds.
We're seeing it used mostly in heavy fabrication shops and logistics hubs where teh 1150mm or 1220mm fork length handles euro pallets and custom skids alike, the 550/685mm outer width options cover the typical range. 80/70mm small wheels paired with 180x50mm big wheels in nylon or PU give decent roll on concrete but it's not for rough terrain — the steel frame takes abuse though.
The 1-year defects but most buyers go with the 685mm forks for stability with wider loads, and we usually stock both nylon and PU wheel sets (check lead time for custom durometers). Plastic handle is standdard, not rubberized, so it's fine for gloved operators but gets slick with oil.
What it does is offer a pretty straightforward OEM option — we've done custom fork lengths up to 1500mm for specific pallet sizes, though the 200mm lift stays fixed unless you specify a different cylinder. CE certifcation is on every unit, and we batch-test the hydraulics to 1.5x rated load as a rule.
Tighter tolerance on the fork parallelism than most import units, give or take 3mm across the pair, which matters when you're shuttling between racking uprights. We don't recommend it for continuous 10-ton use in 3-shift operations — the 5-ton version is more practical there, and the smaller wheels wear faster under constant heavy load anyway.
It ranges from 1 ton to 10 tons, so you can pick the capacity that fits your specific needs.
Yes, you can choose between nylon and PU wheels depending on your floor type and load requirements.
It comes with CE certification, ensuring it meets European safety and quality standards.
We offer a 1-year warranty covering manufacturing defects, with OEM support available for custom requests.
Fork lengths are 1150mm or 1220mm, and outer widths are 550mm or 685mm, so you can match your pallet sizes.
