Industrial Grade 1000W Fiber Laser Cleaning Machine for Rust Removal and Surface Treatment

The pulse frequency range shifts depending on the model you pick, but for the 1000W unit it sits at 20-200kHz, and that gives you enough control to strip heavy rust without etching the base metal—something the lower-power units struggle with, actually.

We run every unit through a 72-hour burn-in test at full rated power before it ships, so you're not getting a box that fails on day three, and the laser source itself comes from Coherent, Raycus, or IPG depending on your order batch (we usually stock all three, but confirm lead time if you need a specific brand).

The handheld controller is what most buyers go with for field work, but if you're setting up a fixed production line the automatic mode ties into your existing PLC via a standerd I/O interface, and we'll send you the wiring diagram with the unit.

It's not great for thin alumnum foil or reflective surfaces below 1mm thickness—the beam can punch through rather than clean—so if your substrate is under that threshold you'll want to test a sample first, and our company can arrange a retest with your materail if you cover the freight.

CE and FDA certification are standard on every machine, but the ISO 9001:2000 covers our production line, not just the final assembly, so batch-to-batch consistency on optics alignment is tighter than most unbranded import units you'll see at half the price.

The COA our company provide includes the measured output power at three frequencies, teh beam profile M² value, and the coolant flow rate for water-cooled models; if you need a retest after six months or so, just send it back and we'll run the same protocol for the cost of shippng.