Account
Inquiry
You're basically looking at a machine that takes jumbo rolls of thermal transfer ribbon or hot stamping foil and cuts them down to the exact widths labs or converters need, with teh magnetic clip blades holding the slit edges cleanly in place while the semi-auto leader table feeds materail through without the usual wrestling match with thin films.
Max working speed hits 250 meters per minute and the unwinding diameter goes up to 540mm on that 6-inch shaftless core, but what matters more for most buyers is the rewinding width starting at just 25mm and slitting width adjustable between 650 and 1010mm—we usually have stock on the 220V, 2-phase 5kw motor version, though three-phase can be arranged if you give us a heads-up.
It handles 4 to 20 micron films which covers barcode ribbon (wax, resin, or mixed), fax ribbon, and pigment foil, but honestly it's not great for anything below 4 microns like some capacitor films—those tend to wrinkle with the magnetic clip mechanism unless you're running at reduced speed.
The whole unit is about 1625mm by 2050mm by 1680mm so it'll need a decent footprint, and what it does is let you avoid the headaches of manual slitting when you're doing runs of 50 rolls or so per batch, especially since semi-auto leader table cuts down on setup time by about 15 minutes compared to older models.
We typically ship within 20 days or so form our factory in China, and the MOQ is one unit—though if you're ordering multiple machines our company can sometimes shave a bit off the per-unit price.
The minimum rewinding width is 25mm, so you can slit down to that. If you need narrower, let us know and we can discuss options.
Yes, we can provide a CE certificate and a factory inspection report upon request. Just let us know what you need before shipping.
Typically 15-20 working days after order confirmation, depending on current production load. We'll confirm a precise timeline when you place the order.
It handles 4-20 micron films, including PET, thermal transfer ribbon, and hot stamping foil. The magnetic clip blades give clean slits even at the thin end.
We pack it in a plywood case with foam padding for export. Usually shipped via sea freight FOB from Shanghai or Ningbo. You can arrange your own forwarder or we can recommend one.
