Account
Inquiry
We're looking at the F5Z here, a 5-axis dental mill that runs dry only — 0.5KW spindle power gets you form 3000 to 60000 RPM, and it's air-cooled so no coolant mess. The working range is A: 360° ±90° and B: ±30°, which basically means you can tackle complex geometries for crowns or bridges without repositioning the blank. It handles zirconia, PMMA, resin, wax, and PEEK, with matrial sizes from 98×10mm to 98×25mm — so 98mm pucks are your standard.
Most buyers go with this for inlays and abutments too, but it's not suited for titanium or any metal — dry milling just won't cut it there. The 4-position automatic tool changer is pretty straightforward, though you'll want to check that your burs are compatible with the collet system; we usually stock standard 6mm shanks. Production time runs about 10-20 minutes per piece, give or take depending on the material and complexity.
It's got CE and RoHS certs, so compliance in Europe is typically fine, but we don't always have a COA on hand for every batch unless you request it. One thing a buyer might not think to ask — the spindle bearings are ceramic hybrid, which holds up better in dusty dry-mill environments than standard steel. The machine weighs 115kg and measures 470×618×710mm, so you'll need a sturdy bench or stand.
Anyway, ordering is pretty much standerd — MOQ is one unit, input votage is AC 100-235V, 50-60Hz, so it works globally. Lead time is usually 20 days or so, but confirm that before you place the order because we've seen delays during peak seasons. We ship it with a TDS and basic setup guide, though you'll need your own compressed air line for the air cooling.
Also, the 5-axis movement gives you that A-axis full rotation and B-axis ±30° tilt, which is tighter tolerance than most 4-axis mills for undercuts — a detail that matters if you're doing complex posterior bridges. 98×10mm pucks are the smallest we recommend, and 98×25mm is max, so plan your stock accordingly.
We typically start at 1 unit for new clients, but we can discuss bulk pricing if you're looking to equip multiple labs.
It's CE and RoHS certified, so it meets EU safety and environmental standards right out of the box.
Yes, it handles PEEK along with zirconia, PMMA, resin, and wax—just keep it to dry cutting only.
Usually around 15-20 working days after order confirmation, depending on your location and customs.
It has a 4-position automatic tool changer, so you can run multiple burs without stopping to swap them manually.
