Account
Inquiry
What really sets this apart is the caries detection mode—most lights just cure, but this one also helps you spot problem areas before you even start drilling, which saves a lot of back-and-forth with a separate diagnostic tool.
You get five operation modes (Normal, High, Turbo, Fast, and Check) with intensity ranging form 600 to 2300mW/cm², and the Turbo mode hits that 2300 peak for a 1-second cure. It's a 10W wide-spectrum LED inside an aluminum alloy housing with a 360° rotating head, so you're not fighting awkward angles.
battery is 3.7V with 1500mAh, and it's got over-voltge, over-current, and short-circuit protection built in—basically, it won't fry itself if you accidentally plug in a bad adapter. That adapter is a standdard DC 5V 2A unit, input 100-240V, so it works worldwide with just a plug swap.
We usually have stock on these, but the MOQ is typically 50 units or so for the wholsale price. Lead time is roughly 15-20 working days after order confirmation (check current timing, as it can stretch during peak season).
It's not really meant for heavy-duty composite curing on large posterior restorations—the fast 1-second cure is great for spot work, but for deep fillings you'll want the slower modes to avoid shrinkage stress. The Check mode lets you verify cure depth at about 600mW/cm², which most buyers don't think to use.
Package dimensions are 23×16×7cm in the inner box, so shippng costs are pretty reasonable for air freight. Aluminum construction means it's durable but not as light as some plastic-bodied units—handle it once and you'll notice the solid feel.
Our MOQ is typically 50 units per model, but we can negotiate smaller trial orders for first-time buyers. Just reach out to our sales team.
Yes, the M-Cure 3 is certified with ISO, CE, and CFDA. We can share the certification documents upon request—just ask your account manager.
In Fast mode at 2300mW/cm², the battery runs for about 40-50 minutes of continuous use. A full charge takes roughly 2-3 hours with the included adapter.
The intensity is adjustable across a range from 600 to 2300mW/cm² depending on the mode you select—Normal, High, Turbo, Fast, or Check. You can switch modes easily with the button.
The aluminum alloy construction is both lightweight and tough, built to handle repeated use. It also helps dissipate heat, so the light stays cool even during extended curing sessions.
