Account
Inquiry
The pricing depends on quantty obviously—for a single unit it's $12,800, for 6-unit setups we're at $11,200 each, and at 20+ our company can talk around $9,900 or so. Basically we're aiming to make this the most cost-effective dry milling solution in this class without corners on the spindle.
It runs at 60,000 RPM with 5-axis simultaneous control and hits 0.01mm accuracy for crowns, bridges, and pretty much any zirconia restoration you need. The 6-bur automatic tool changer keeps it moving through a case without constant swaps. Air-cooled too, so no coolant mess to deal with.
MOQ is 1 unit for sampling, and our company have about 8 in stock right now but lead time for larger orders is usually 25-30 days after order confirmation. Shippng weight is 85kg, dimnesions 530×470×560mm, so it fits standard benches without special reinforcement. It's better than most in its weight class for vibration damping (actually that's a real concern with dry milling, the mass matters).
One thing people don't think to ask—the machine runs on 0.5-0.8MPa compressed air, so make sure your lab has a decent compressor or it won't maintain pressrue through harder zirconia blocks. Also it's strictly dry milling, not suited for anything like titanium or lithium disilicate, which needs coolant.
We'll ship with a power option for 220V/50Hz or 110V/60Hz as specified, and include CNC controller programmed for common material types already. The CAM setup is pretty straightforward—open it, load your path, and you're milling. 1-year the spindle and electronics.
We typically require a minimum order of 1 unit for initial orders, but this can be negotiated based on volume and partnership terms.
Lead time is usually 15-20 working days after order confirmation and payment, depending on stock availability and your location.
Yes, the DDM-5D is ISO and CE certified, and we provide full certification documents with each shipment to support compliance and quality assurance.
Absolutely, the DDM-5D supports zirconia, PMMA, wax, and PEEK, so you can handle a variety of restorations like crowns, bridges, and veneers with one machine.
The machine is packed in a sturdy wooden crate with foam padding to prevent damage during shipping. Store it in a dry, dust-free environment within 0-40°C to maintain performance.
