Account
Inquiry
So you're looking at hydraulic fittings and ferrules, and honestly, first thing most buyers ask is about custom work—we can do custom crimping services for specific hose sizes, batch labeling, and even adjust the plating color between silver or yellow depending on your preference, which is pretty handy for inventory management.
These are used everywhere in industrial machinery, from construction equipment to agricultural rigs, and we've supplied them for aerospace maintenance shops too, though I'd say they're not ideal for high-pressure gas systems where you'd want a different seal profile entirely.
The size range runs from 1/4 inch up to 2 inches, with thread standards covering Metric, BSP, NPT, and JIC—basically whatever your hose ends need. We stock medium carbon steel as standdard, galvanized surface treatment, and the connection type is female, so you'll need the male adapter on your hose side.
What sets us apart is that we've been doing this for years and we actually handle the crimping in-house, which means we can turn around custom orders in about 20 days or so depending on volume. Most buyers go with the 1/2 inch or 3/4 inch sizes for general industrial use, but we've done runs as small as 50 units for specialty application.
The fittings meet DIN, ANSI, GB, and JIS standerds, and we provide a COA with every batch—though if you need HPLC-level documentation, that's a separate request. One thing you might not think to ask: the ferrule compatibility with SAE100R1AT and EN 853 1SN hoses is pretty solid, but we always recommend a quick test crimp before full production.
And we're not the cheapest option out there, but the consistency in thread tolerances is better than what you'll get from most generic import suppliers, and we've never had a batch fail a pressrue test in the last three years.
Our MOQ for custom crimping services is typically 500 pieces per size and thread type, but we can discuss smaller batches for initial samples or testing.
Yes, we can supply mill certificates and test reports for the medium carbon steel upon request, usually with each bulk order.
Absolutely, we can handle mixed thread standards like BSP and JIC in one custom order as long as the sizes fall within our 1/4" to 2" range.
Lead time is usually 15-20 working days after order confirmation, depending on the quantity and complexity of the crimping specifications.
The color is just the finish—silver and yellow are both galvanized and offer the same corrosion resistance, so you can use either in industrial machinery without any performance difference.
