Account
Inquiry
So if your custoemr is building a pneumatic control cabinet for automated packaging lines, they'll appreciate how these push-to-connect reducers let them step down from a 12mm main line to 8mm branch tubing without needing a separate adapter—it's basically one less joint to leak, and we've seen that reduce assembly time by about 15% in our own test runs.
The PGJ series covers both metric and inch sizes, so you can mix a 6mm PU tube with a 1/4" nylon line in the same fitting if that's what your setup calls for, and we stock over 60 model combinations like PGJ 8-6 or PGJ 12-10 that handle the common transitions most buyers go with anyway.
Body is PBT plastic with nickel-plated brass inserts on the collet and release ring, which holds up fine in the 0-60°C range and 0-150 PSI operating pressure—though we don't recommend it for high-vibration environments where metal fittings would last longer, it's a trade-off for the weight savings and lower cost per unit.
100% air-tested at the factory, plus a 5% sample batch gets a 10-bar water test, and we run about a million pieces a month so lead time is usually 15-20 working days or so for standard sizes, but custom fittings form your drawings or samples take a bit longer (typically 4-6 weeks) depending on tooling changes.
You'll want to match the tubing material to the fitting—polyurethane, nylon, polyethylene, or polypropylene all work fine, but we've had some buyers try silicone tubing and it doesn't seal right because the collet can't get good bite, so stick with teh recommended types for a proper connection.
MOQ on standard models is 100 pieces per size, and our company can do mixed pallets if you need a variety for prototyping, just confirm the exact inch or metric combo from the PGJ chart since the 8-6 and 10-8 are the most popular but the 12-10 is catching up for larger pneumatic manifolds.
We don't have a strict MOQ for standard sizes, so you can start with a small trial order. For custom fittings, we'd ask for a bit higher volume to cover setup costs, but just let us know your needs and we'll work it out.
For stock items, we can ship within 7-15 days after order confirmation. Custom orders usually take 15-30 days, depending on the complexity and your quantity.
Yes, we can issue a certificate of compliance and material test reports upon request. Just mention it when you place the order, and we'll include the docs with your shipment.
Our standard PGJ series uses PBT for the body, but we can discuss alternatives if your application requires it. Send us your specs or a sample, and we'll see what we can do.
We typically pack them in cartons with inner plastic bags to keep them clean and dry. For large wholesale orders, we can also arrange bulk packaging or custom labeling if you need it.
