OEM Supply 1.56-1.62GHz Anti Drone Signal Jammer – Custom Spec, Your Brand, MOQ 50 Units, Sample Free

We're looking at a 1.56-1.62GHz anti-drone jammer module with 46dBm output power, and that's adjustable within a 20-24V operating votage range so you're not locked into a single configuration. It's basically a custom-branded unit for your own line — MOQ is 50 pieces, and we send a free sample for evaluation first. Teh RF port is SMA-F, the LED indicator is red, and the signal flatness holds at ±0.5dB, which matters more than you'd think when you're trying to cover a consistent frequency band without dropouts.

Actually, the 46dBm output is standard, but what we do is let you tweak the power level to match local regulations (usually 2-4 weeks lead time for custom spec). Most buyers go with the 46dBm for open-area drone defense, but if you need lower power for smaller perimeter setups, our company can dial it back without changing the board design. The housing is 96x53x17mm alumnum, compact enough to stack into arrays, and we run a 2-hour continuous burn-in test at full power before boxing — found that catches most early failures.

Also, the build is pretty straightforward: 3.7A current draw at 24V and 46dBm, so you'll want a supply that can handle that. We've had some buyers try to run it at 20V to save power, but then the output drops noticeably — better to stick with 24V if you need the full 46dBm. It's not suited for wide-area jamming over kilometers; this is for small perimeter anti-intrusion or sensitive site signal shielding, roughly 50-100 meters radius give or take depending on antenna.

For ordering, we ship in plain boxes with your branding — just send us the artwork and we handle rest. The sample is free, but you cover shipping (usually $30-50 depending on your location), and we'll include a COA with that sample. MOQ of 50 units, and we usually have stock for the standerd 1.6GHz spec, but confirm lead time if you need a custom frequency offset within that 1.56-1.62GHz band.