Account
Inquiry
We needed something that could handle both a small conveyor sub-assembly and a vent fan in the same build, so I looked at the S370 series — it's a permanent magnet brush motor that actually runs on 4.5V up to 24V DC, which covers a lot of ground for us.
What sold me was the speed control being adjustable from 2000 to 25000 RPM, and at under 300W input power it's not going to trip our smaller PSUs. Noise stays below 65dB, which is quieter than the old units we were swapping out, and life expectancy is rated over 5000 hours continuous — that's roughly 200 days or so of round-the-clock operation before we'd even think about a replacement.
But it's not for everything — the brush commutation means it's noisier electrically than a brushless option, and the IP20 protection class is pretty much for clean indoor use only. We usually have stock on the standerd round shaft version, but check lead time if you need a custom mount or shaft config (usually 2-4 weeks).
The real detail most people miss is the insulation class availability — you can get A, B, F, or H depending on your heat tolerance, and for our tool application we went with class F because of that it handles the ambient temp spikes better than the baseline. Operating range is -20°C to +60°C, storage goes to -30°C, so it's fine for our warehouse enviroment.
Anyway, the MOQ was reasonable at 50 units for the OEM batch, and we got CE and CCC certs on the COA without any hassle. Just make sure you confirm teh foot mount orientation on your order form — they default to one pattern but it's customizable if you mention it.
We offer Class A, B, F, and H. For higher heat resistance in demanding industrial applications, go with Class H. Class A is fine for lower-temp uses like household appliances.
Yes, the round shaft is standard, but we can customize it to your specs. Same for mounting — foot mounted is default, but other options are available if you let us know what you need.
The S370 is certified ISO9001, CCC, and CE. We can provide the relevant documents upon request to meet your compliance needs.
MOQ is usually 500 pieces for standard specs. Lead time runs about 15-25 working days depending on order size and customization.
Keep it in a dry, clean environment between -30°C and +70°C. Avoid humidity and dust to protect the commutator and brushes, especially if you won't use it right away.
