Account
Inquiry
Sample pricing lands around $2.50 per unit for small test quantities—once you hit 100 pieces it drops to $1.80, and we'll do $1.35 for full-pallet orders of 500 or more, basically you're paying for the engineering not teh plastic.
These hold up to 150 psi with polyurethane or nylon tube pushed straight in, and one quick click locks it—something most cheap fittings can't claim is the -29.5 in Hg vacuum rating, so they work on both pressrue and suction lines.
You'll get a rotating body on PL and PT types, which is actually handy when you're working in tight panel spaces where the tube needs to pivot about 30 degrees without kinking. 4. The G thread comes pre-coated with Teflon or an O-ring already seated, so you don't reach for thread tape or paste—just twist hand-tight, give it a quarter turn with a wrench, and it's sealed.
MOQ for mixed sizes is pretty relaxed at about 50 units, but if you want every single one in bright orange or red rather than the typical blue/white, they charge a $15 setup fee per color change (usually 2-4 weeks lead time on that).
Our standard MOQ is 100 pieces per model, but we can negotiate lower quantities for sample orders or first-time buyers. Just reach out to our sales team.
Yes, we include CE and ISO certification copies with every order. Just let your sales contact know if you need them in a specific format.
Absolutely, they're designed for both polyurethane and nylon tubes up to 150 Psi. Just make sure the tube outer diameter matches the fitting size you choose.
For a full range mix, typical lead time is 15-20 working days. We keep popular sizes in stock, so partial shipments can be faster if needed.
Store them in a dry, cool place away from direct sunlight and high heat. The plastic and O-rings can degrade if exposed to temps above 60°C or UV for long periods.
