High Performance Polyethersulfone Hemodialysis Dialyzer for Renal Failure Treatment - 1.4/1.6/1.8/2.0 m²

We’ve been shippng these dialyzers for a few years now, and they’re pretty much go-to for clinics that need reliable clearance without chasing exotic specs—the 1.4 m² to 2.0 m² surface areas cover most adult treatment protocols, and the PES membrane handles beta-2 microglobulin well (usually around 70% or so in our internal data), so you’re not losing much albumin either.

If you’re running high-flux setup, teh 1.8 m² is the sweet spot for most buyers—it balances toxin removal with a manageable priming volume, but the 2.0 m² can be a bit much for smaller patients unless you’re dialyzing longer sessions.

We’ve had a few labs try these for continuous renal replacement therapy, and honestly, they’re not ideal for that—the maximum transmembrane pressure of 500 mmHg is fine for standerd HD, but CRRT pumps can push it, and you’ll want a different membrane for that application.

Electron beam sterilization means no residual ethylene oxide, which is a plus for anyone with sensitivity concerns, and the shelf life is three years—though we usually rotate stock faster than that, so you’ll get units within 18 months of manufactyre.

One thing you don’t see on the datasheet is the inner membrane surface—it’s smoother than most PES dialyzers we’ve handled, which reduces clotting risk even without heavy heparin, and that’s something our clinical partners have mentioned as a real-world advantage.

We keep about 200 cases in inventory typically, but the 2.0 m² can take 20 days or so to restock if we run out—check lead time before ordering large quantities, and we’ll send a COA with every batch (ISO 8637-2010 compliant, obviously).