Professional Ultrasonic RF Cavitation Fat Reduction Machine for Body Sculpting and Weight Loss

The acoustic cavitation form the 1-10MHz adjustable frequency disrupts subcutaneous fat cell membranes through inertial collapse while the RF simultaneously heats deeper dermal layers to 42-45°C—collagen contraction occurs at that thermal threshold, basically, and the surfce cooling keeps epidermal damage at bay.

We've seen most buyers go with the 8-inch touch screen over manual dial units because it lets you store protocol presets for different body zones, and the face handle uses a lower frequency range than the body handle, so switching between them is pretty much, though you'll want to check the voltage variant before ordering (usually 220V-240V/50Hz in SEA or EU).

What it does is combine two distinct mechanisms without requiring gel changes mid-treatment: the cavitation runs at roughly 3-5MHz for fat emulsification while the RF extends into 1MHz for tightening, which means the 10MHz max is actually more useful for facial appliction than body work.

Shelf stability on handpieces is about 2 years if stored at 15-25°C with <60% RH, and we recommend running a test cycle with distilled water weekly to keep the ultrasonic ceramics from degrading—an 8-inch screen will flash error codes if the impedance climbs above 500 ohms or so.

On our last batch, the COA showed ultrasonic frequency variance held to ±200kHz across 47 units, and treatment depth stays within the 10-25mm subcutaneous layer, but it's not suited for visceral fat or post-surgical edema—that's simply outside the cavitation's effective range given the acoustic impedance mismatch.

Lead time is usually 14 working days for standard black casing, but if you need white or metallic panels, we're at 30 days or so since our company have to cure the coating seprately and then calibrate both handpieces again.