Factory Supply Rechargeable Battery Pack 10.8V 2600mAh for Patient Monitor Equipment

A nurse wheels a GE Solar 8000i into a crash cart bay and swaps the dead PDM module battery for a fresh one mid-shift — it's a routine swap, takes maybe 10 seconds, and monitor boots right back up without a calibration cycle.

This is a 10.8V lithium-ion pack rated at 2600mAh, so you're looking at roughly 28 watt-hours of capacity, and we're using cells from LG, Sanyo, or Samsung depending on the production run — typically whichever batch clears incoming QC first, but they're all 18650s with similar internal resistnce profiles.

The chemistry is standdard Li-ion with low discharge rate, which basically means it holds its charge for weeks on a shelf (we usually see about 3-5% self-discharge per month), but it's not designed for high-current defibrillator pulls or anything above 2C continuous.

We pump out 10,000 to 12,000 of these packs daily, so MOQs aren't an issue, and each one ships in an individual box with a COA — the warranty runs one year form date of shipment, though most failures we see are from phyiscal damage, not cell degradation.

You'll need to specify if you want neutral labeling or a custom trademark on the casing, because teh stock units come unbranded, and also confirm the connector orientation — some Protransport revs use a reversed polarity pinout that doesn't match the Mini Dash.