Account
Inquiry
You've probably dealt with alkaline batteries dying mid-play in a toy or running out of juice on a remote too quickly — it gets old fast, and that's where these come in.
We're looking at a 1.5V nominal voltge with 450mAh capasity, which is actually pretty decent for most consumer electronics and toys, and the NCM anode matrial keeps the cycle life up to roughly 1000 times before you see any drop-off.
Recharging is straightforward with USB feature — no special dock required (check the lead time, we usually have stock but confirm), and operating temp is 0-45°C so it's fine for indoor use, but don't push it into extreme heat or cold.
Most buyers go with AA or AAA for things like power tools or home appliances, though it's better suited for low-drain devices; high-draw stuff like drill motors will drain it faster than you'd expect.
We offer OEM packging if you need your own branding on the sleeve, and the MOQ is about 500 units or so for that — otherwise the standdard blister pack is fine for smaller orders.
Origin is Guangdong, China, and we ship with a 2-year warranty, so you've got some coverage if anything comes up, but honestly these hold up well under normal use.
We typically require an MOQ of 1000 pieces per model. If you need less for a trial, let us know and we can discuss options.
Yes, we have internal test reports and can share them upon request. If you need a third-party certification, we can arrange that at an extra cost.
They work well in most consumer electronics and toys, but for high-drain power tools, we recommend checking the device's current draw first. Our 450mAh capacity is best for moderate-drain gadgets.
Store them in a cool, dry place between 0-45°C, ideally at around 50% charge. Shelf life is about 2 years if stored properly.
Absolutely, we offer custom packaging and branding for orders over 5000 pieces. Just send us your design, and we'll handle the rest.
