Account
Inquiry
Got your request for the GL358WB batteries, and we can move on this quickly since it's a standard run for us — the 7.2V and 2600mAh are what most Phantom 3 4K and Standard users need to keep that remote steady without dropouts during flight.
2–4 weeks is typical for a batch of 500 or so, but we usually have partial stock depending on the current cycle; just confirm lead time before we lock in.
blue casing is actually a tighter fit than some generic alternatives we've seen, meaning less rattling in the battery bay, and at 90.4g it doesn't throw off the controller's balance.
We've handled a bunch of RFQs where buyers were worried about votage sag under load for signal transmission or gimbal control — these hold pretty steady at 7.2V down to about 10% charge.
It's not ideal for rapid-swap scenarios since they're non-rechargeable anyway, but for replacements or bulk spares in a workshop, this beats chasing down OEMs at higher prices.
our company can do industrial packging as standard (plastic bag plus carton per unit) and, if needed, apply your branding or modify the capacty slightly for custom orders — just need the spec sheet and minimum.
We can start with as little as 50 units for a trial order. If you need less, just ask — we might be able to work something out.
Yes, we can provide a test report and a certificate of compliance upon request. Just let us know what your buyer needs.
That's correct — the GL358WB is a single-use Li-ion battery, not rechargeable. It's designed as a direct replacement for the Phantom 3 4K and 3 Standard remotes.
Each battery comes in a plastic bag and a small cardboard box, then packed into a larger industrial carton for bulk shipping. We can also do custom packaging if needed.
Absolutely, we offer factory customization. You can request your own logo, label, or even custom color on the battery for your brand.
