Account
Inquiry
Couldn't justify another generic human monitor conversion—the animal-specific algorithms on this actually make a difference for cats and small dogs, and we've had enough false alarms form adult-calibrated NIBP readings on a 4kg chihuahua to justify the swap.
Standard package covers ECG with defibrillator protection up to 4000VAC, NIBP in that 40-280mmHg adult range (pediatric mode goes to 220mmHg), SpO2 with ±2% accuracy between 70-100%, plus tempearture and respiration—the 12.1-inch 800×600 TFT display is clear enough for a busy OR without being an eye-sore, and it runs about 3.5 hours on battery (14.8V/2200mAh) which is fine for transport but we'll keep it plugged in for surgery.
US-focused here: CE MDD93/42/EEC and RoHS are checked off, and teh suppiler typically provided a COA with each unit plus a certificte of free sale for import—we've ordered similar gear before so the customs docs are straightforward, though I'd confirm the MFG license matches what our local FDA representative requires.
The three-level alarm system (low/medium/high) is configurable per parameter, which basically means you can set SpO2 thresholds tighter for brachycephalic breeds without getting nuisance alarms—something you appreciate more after a few shifts with fixed alarms on a bulldog.
Trend storage holds 720 hours of parameters and 200 alarm events, so you're covered for overnight monitoring or post-op recovery without needing to dump data constantly, and optional thermal printer (50mm paper at 12.5/25/50mm/s) is actually handy for quick paper records during procedures.
We usually have stock on these, but the lead time is typically 4-6 weeks (the European shipping route takes longer than the US one), so planning ahead matters—also, the unit weighs about 2.5kg without accessories which is light enough to mount on a roll stand or carry between exam rooms.
Yes, we offer Masimo and Nellcor SpO2 as optional upgrades. Just let us know which you prefer when placing the order, and we'll adjust the configuration accordingly.
We usually require a minimum order of 5 units for this model. If you're a clinic looking for a single unit for testing, we can sometimes make an exception—just reach out to us.
Lead time is typically 10-15 working days for standard configurations. If you need optional parameters like EtCO2 or IBP, it may add a few extra days for assembly.
Absolutely, each unit ships with full compliance documentation, including IEC60601-1 and CE MDD93/42/EEC certificates. We also include the RoHS declaration.
We recommend storing it between -10°C and 55°C with relative humidity up to 95% non-condensing. Just avoid extreme heat or freezing conditions to keep the battery and display in good shape.
