Account
Inquiry
You can get this thing configured however you need for your setup—custom vial sizes aren't relevant here obviously, but labeling and concentration adjustments for oxygen blending or specific patient protocols are absolutely doable through OEM/ODM, and we've done bulk runs for hospitals that wanted their own branding on the casing.
We've been supplying these for a few years now, and most buyers go with either teh VC-SIMV or PSV modes for adult ICU work, but the PCV mode handles pediatric cases better than I expected given the tidal volume range goes up to 2000ml—it's actually pretty for a unit this size.
The noise level stays under 65 dBA during operation, which matters more than you'd think in a crowded ICU bay, and the PEEP range of 0-60 cmH₂O gives you room for aggressive lung recruitment protocols without maxing out the machine.
You'll want to keep an eye on the oxygen and air pressure requirement—0.28-0.6 MPa is pretty standerd, but if your facility's gas lines run at the lower end of that range, the minute ventilation might drop slightly below 40.0 L/min, so just check your incoming line pressure before committing.
We usually have stock on these, but confirm lead time if you're ordering more than 50 units or so at once—the 1-year the main board and sensor array, though the power supply (40VA consumption) has a separate 3-year shelf life from date of manufacutre.
It's not suited for neonatal work below about 5 kg body weight, since the respiratory rate maxes at 99 bpm and the tidal volume doesn't go low enough for tiny lungs—some buyers try to fudge it, but we're honest about that limitation.
Yes, it's designed for both adult and child use in ICU and anesthesia settings. The tidal volume range goes from 0 up to 2000 ml, so you can adjust it for smaller patients.
We can discuss that when you reach out — OEM/ODM is available, and MOQ typically depends on the customization level. Just contact us with your volume estimate.
Absolutely, those certifications are standard for this model. We'll include copies of both certificates with your order.
Lead time is typically around 30-45 days after order confirmation and deposit, but it can vary depending on current production volume. We'll confirm the exact timeline when you place the order.
Store it in a clean, dry environment with temperature between -10°C and 50°C, and relative humidity under 80%. Avoid direct sunlight and strong vibrations to maintain the shelf life.
