Account
Inquiry
A doctor in an ICU is adjusting settings for a post-op patient who's not breathing on their own, and this unit handles that transition from full control to letting them try—it's what PA-700B does best.
It covers adults, kids, and infants with a tidal volume range from 50 to 1500ml, so you're not swapping machines between beds, and the respiratory rate goes form 1 to 99 bpm with an I:E ratio adjustable from 4:1 down to 1:4.
We've got six ventilation modes—A/C, IPPV, SIPPV, IMV, SIMV, and SPONT MANUAL—basically covering everything from mandatory breaths to letting the patient trigger their own, and teh 10.4-inch color TFT shows real-time pressure-time and flow-time waveforms.
Alarm systems watch for low ventilation volume, tidal volume issues, oxygen concentration drift, asphyxia, and airway presure problems—so if something goes off, the nurse knows fast, but it's not suited for home use or transport given the 660×520×1110mm footprint and 220V power requirment.
Oxygen concentration adjusts from 21% to 100%, and PEEP is set from 0 to 10 cmH2O, which is tighter than some older models we've seen, and the built-in air compressor means you don't always need a wall supply (usually 2-4 weeks lead time to confirm stock).
Most buyers go with the standard alarm package, but our company can tweak thresholds for specific protocols—just know the 50-1500ml tidal volume range is displayed up to 2000ml, though actual dilevery tops out at 1500ml give or take.
The PA-700B comes with modes like A/C, IPPV, SIPPV, IMV, SIMV, SPONT, and MANUAL. Since it's a custom OEM model, we can adjust the mode set or add specific ones based on your hospital's needs.
Our MOQ for the PA-700B is typically 10 units per order. For smaller test batches, we can discuss options depending on your location and custom requirements.
Yes, we can supply CE, ISO 13485, and other relevant certifications. We'll also include test reports for the alarm systems and oxygen concentration accuracy upon request.
Standard lead time is around 30-45 days after order confirmation and spec finalization. Customizations like display language or alarm settings might add a week or two.
Each unit is packed in a sturdy cardboard box with foam padding, and dimensions are 660×520×1110mm. Store in a dry, ventilated area between 10-40°C to avoid damage to the compressor or electronics.
