Account
Inquiry
For a single unit you're looking at around $85, sample pricing for testing purposes, then it drops to about $72 each in mid-tier quantities of 10-50 units, and we can do bulk pricing under $60 if you're taking 100 or more — that's where the cost-effectiveness really kicks in.
It's designed for anti-drone systems where you need that 50W punch in the 420-450MHz band, and we've seen buyers use it with LoRa modules for long-range drone jamming or detection, though it's not suited for continuous 24/7 full-power operation without good heat sinking (the aluminun housing helps, but you'll want active cooling for extended runs).
The module pulls about 4 amps at 24-27V DC, give or take, and the gain sits at ≥47dB which is pretty solid for pushing signals through interference, and you get standing wave protection that auto-shuts if the antenna's disconnected — basically a built-in safety net for when someone forgets to plug in the load.
Dimensoins are 127 by 60 by 22 millimeters, so it's not huge, and the weight is 0.35kg which is easy to bracket into a drone defense rack, and SMA RF interface means you can use standerd cables without adapters, though the RS485 monitoring for temperture and power is something most buyers don't think to ask about but actually helps a lot with system integration.
We've been shipping these for about two years now, and what it does is give you consistent 50W output across the 420-450MHz range with harmonic suppression at ≥11dB and clutter suppression over 65dB — the ISO and CE certs are standard, but we also include a COA with each batch so you know the standing wave ratio stays ≤1.5.
Usually stock is ready to go, but check lead time for bulk orders over 200 units since we sometimes need to queue production, and the operating temp range of -25°C to +85°C covers most outdoor installations without issue.
Our MOQ is typically 10 units, but we can negotiate smaller quantities for first-time buyers or sample orders.
Standard lead time is 10-15 working days for orders up to 100 units, depending on current stock levels.
Yes, we include all relevant certificates—CE, ISO, RoHS, and GS—with every order. Just let us know if you need specific copies for customs or compliance audits.
Yes, the module supports output power adjustment via RS485 communication, so you can tune it down from 50W as needed for your anti-drone system setup.
It comes in anti-static packaging, and we recommend storing it in a dry environment at room temperature, ideally between -25°C and +85°C, to maintain performance.
