We’re shiping out the SNP9000N pretty regularly now—the 12.1-inch TFT screen at 800x600 is clear enough for most bedside setups, and it hits the standard six parameters out of the box: ECG, SpO2, NIBP, temp, resp, and PR. Basically, it covers adult, pediatric, and neonatal ranges, which most buyers find useful for mixed wards.

Heart rate spans 15 to 300 bpm for adults, SpO2 goes 0-100%, and NIBP maxes at 270 mmHg—temp range is 5 to 50°C, so it handles typical clinical conditions. You’ve got 720 hours of graphic and table trend storage, plus 200 alarm record groups, and teh battery runs about two hours standerd or four if you opt for the upgrade.

What it does is let you monitor without constant plugging in—TCP/IP networking is standard, WiFi is optional. The 5-lead ECG is standard, but you can swap in 3 or 12 leads, or add IBP, ETCO2, BIS, or CO as options. Just don’t expect it to pull double duty for high-acuity OR cases with all those add-ons—it’s better suited for step-down units or general floor monitoring.

One detail most people don’t ask about is the weight: under 6.5 kg, so it’s actually easier to move than old 8kg models we used to carry. Operating temp is 0-40°C, which is fine for climate-controlled rooms but not for storage in a hot supply closet—just a heads-up.

Certifications include FDA and ISO13485, and we typically have stock, but check lead time if you need the 4-hour battery or the WiFi option—those add roughly 20 days or so. MOQ is usually 1 unit for sample, 10 units for production batches, and our company provide COA with each ship.
Our standard MOQ is 10 units, but we can negotiate for smaller trial orders if you're just starting out.
The monitor is FDA and ISO13485 certified. We provide full documentation including CE, FDA registration, and test reports upon request.
Yes, it supports 12-lead ECG as an optional parameter. The standard model comes with 5-lead ECG; upgrading to 3/12-lead requires an additional module.
Lead time is usually 15-20 working days after order confirmation and deposit. Custom packaging might add 3-5 days.
It stores up to 720 hours of graphic and table trends and 200 alarm records. It supports TCP/IP networking, and WiFi is optional, so it can integrate with most hospital networks.