Account
Inquiry
We went with the Grand120 because of that it covers pretty much every standerd parameter we need — ECG, RESP, PR, SpO2, NIBP, and TEMP — right out of the box, and the 12.1-inch anti-glare TFT screen is actually quite readable even under harsh overhead OR lights.
The 12-lead ECG analysis is a big plus for us since we're moving toward more cardiac monitoring in the step-down unit; it handles adult, pediatric, and neonatal NIBP ranges seperately (40-275, 40-200, and 40-135 mmHg respectively), so we don't need separate units for different age groups.
Battery life was a deciding factor — built-in 4400mAh lithium-ion gives us about 20 days or so of normal runtime for intra-hospital transport, and we didn't want to rely on swapping batteries mid-transfer.
It stores 2000 hours of trend data and 2000 NIBP measurements plus 2000 alarm events, which beats our current monitors handily; the optional EtCO2 and 2-channel IBP make it flexible enough for the ICU if we need to move units around.
We'll need to confirm lead time on the Wi-Fi option (usually 2-4 weeks) — the standard Ethernet and USB ports are fine for now, but the central monitoring compatibilty with the GRAND system means our company can eventually integrate without buying new racks.
One thing that came up in the spec review: defibrillator protection is included, but this is definetly not suited for MRI environments, so we'll keep that in mind when assigning it to specific rooms.
Our standard MOQ is 10 units for the Grand120, but we can negotiate for smaller trial orders if you're just starting out.
Yes, we include copies of CE and ISO13485 certificates with every order, and we can also share them in advance for your review.
It's designed specifically for the GRAND Central Monitoring System for full compatibility, but if your system is open-architecture, we can discuss potential integration options.
The built-in 4400mAh lithium-ion battery gives you roughly 3 to 4 hours of continuous operation under normal monitoring conditions, depending on which parameters are active.
For units with EtCO2 and IBP options, lead time is typically 15 to 20 working days after order confirmation, as we assemble and test each configuration individually.
