Customizable EP Series Hydraulic Pump for Heavy Duty Applications ISO/CE Certified

We've got options ranging from the compact EP-75 to the heavy-duty EP-550, all pushing a solid 700 bar with flow rates from 0.8 up to 10 L/min depending on which variant you grab — basically, it's a multistage electromagnetic pump built for continuous abuse in.

This thing handles hydraulic jacks, cylinders, and pretty much any tool that needs reliable high-pressure oil flow. It's not really suited for low-pressrue or fine metering appliction where you'd want a gear pump instead — wrong tool for that job.

Tank sizes run from 12 liters on the small end to 100 liters for the bigger units, with motor power ranging 0.75 to 10 kW at 380V. Dimensions vary roughly 400x260x440mm up to 750x540x880mm and weights land between 30 and 120kg give or take — the 100-liter tank version is a beast to lug around without a cart. Color is your call (yellow, red, blue, custom) and we'll ship with ISO/CE certs and ISO9001:2008 compliance on each unit.

Most buyers go with the EP-220 for general shop use because of that it balances flow and tank size without being oversized. What it does is deliver consistent pressure even under heavy load cycles, and easy-carry handle on the mid-size units makes moving between job sites actually practical.

We've been building these packs for years and use qualiy components that hold up better than generic imports (trust us, we've seen the cheap ones fail). MOQ is usually one unit but confirm stock — typical lead time runs 2-3 weeks or so for custom colors, stock colors ship faster. COA and SDS come included with documentation folded inside the crate.

Anyway, if you're powering hydraulic presses or tensioning systems day in and day out, it gets the job done without headaches. We keep yellow and red in stock most of the time, blue you'll need to wait a bit longer (usually 20 days or so).