Account
Inquiry
We've been shipping these to grain storage operations for a while now, and most buyers are the ones doing inverted silo installations where you need to lift and align those tank walls precisely without things shifting.
The TCT-50-2300 gives you 50KN at 16MPa, with an 800mm stroke that tops out at 2300mm lift height — system flow runs 38L/min, so it's pretty quick for the size, and the working temp range of 20-60°C covers most shop floor conditions.
That triangular bracket base is something you don't see on cheaper jacks, it actually grips uneven ground better than flat plates do, and we've had guys comment it reduces the wobble when you're cranking up a heavy silo section.
380V power and DC 220V control voltage means it hooks into standard indutrial panels without extra transformers, and teh dual lock — hydraulic self-locking plus a pin lock — is basically fail-safe if a line blows.
Each unit comes with its own COA form the batch, and we usually have stock within 20 days or so, but confirm lead time for larger quantities since we've seen demand spike recently.
What you'll get when ordering is the jack assembly with that stainles steel cylinder, the bracket base, and the locking hardware — just specify if you need control cable length customiezd.
Our MOQ is typically 10 units for this model, but we can discuss smaller orders for initial testing or sample evaluation.
Yes, we include copies of the CE and ISO 9001 certificates with every order to verify compliance.
It uses both a hydraulic lock and a pin lock—the hydraulic holds position during operation, and the pin lock engages manually for secure holding when stopped.
Yes, it's stainless steel, so it resists rust and corrosion from dust and moisture common around grain silos.
For 50 units, lead time is about 20-25 working days after order confirmation and deposit.
