Account
Inquiry
So the guys on the line are strapping pallets of cement board, and they need something that doesn't tie them to a power outlet or an air hose, which is basically the whole point of this unit—it's battery powered, weighs in at 2.75kg with the battery on it, and uses a friction joint to seal PP or PET straps from 13 to 16mm wide.
Tension goes form zero all the way up to 2100N, which is adjustable, so you can dial it in for something fragile like a carton of food packaing or crank it up for steel strapping substitute appliction, and the sealing time is adjustable between 1 and 3 seconds depending on how hot the friction weld needs to be.
We're ordering it because the crew has been using a pneumatic tool that's a pain to drag around, and this one is 330x138x168mm, so it fits in a standard tool box or on a cart, and the battery is about 500 charge cycles—usually our company have stock, but confirm lead time if you need more than 50 units or so.
It's not suited for continuous high-speed production lines where you'd want a fully automatic machine, but for a warehouse or a manufacturing floor doing mixed pallet loads, it's a solid fit, and the CE cert is there, so compliance isn't an issue for most buyers.
One thing you don't think to ask: the strap thickness range is 0.5 to 1.2mm, and if you're running a really thin polypropylene strap at the low end, you might need to tweak sealing time a bit—the manual covers that, but it's good to know going in.
Also, the warranty is one year, which is pretty standard for this price point, and the MOQ is typically one unit if you're just testing, but we usually buy in batches of 10 for the logistics guys.
We typically require a MOQ of 10 units for first orders, but we can discuss smaller trial quantities if you're just testing the tool in your operation.
Standard lead time is around 7-15 working days, depending on stock levels. For bulk orders, we might need a bit longer to assemble and test each unit.
The CE certificate is standard, but we can also supply a factory inspection report or material test certificate upon request. Just let your account manager know what you need.
The tool runs on a 14.8V Li-ion battery rated for about 500 charge cycles. Yes, we sell spare batteries separately if you need to keep the tool running through long shifts.
Yes, it's compatible with both PP and PET straps in 13-16mm width and 0.5-1.2mm thickness. No adjustments or extra parts needed—just switch strap material and you're good to go.
