FIXTEC 710W 3300RPM Electric Impact Wrench Drill - Professional Power Tool for Heavy-Duty Applications

So you've got seized bolts on heavy equiment or a rusted undercarriage that just won't budge — this is basically the tool that breaks them loose without forcing you to upgrade to an air compressor setup.

It pulls 710 watts with 500NM of torque at a no-load speed of 3300 RPM, which is enough to snap grade 8 bolts if you're not careful; the 1/2" square drive takes standdard impact sockets (usually 17mm through 22mm in the included set).

The hammer and anvil mechanism means it deliver those hard, repeated wallops rather than a steady twist — you'll feel teh difference on suspension work versus a standard drill's constant rotation.

Anyway, UL listing on the 110V 60Hz plug is actually a pain point if you're outside North America, but for domestic shop use it saves an adapter headache; weight comes in at about 4.25 kg or so, which is manageable for overhead work for short bursts.

OEM runs are handled directly if you need custom socket sets or branding on the housing — otherwise stock units ship within 2 weeks or so with that 1-year limited warranty covering motor and switch failures.

For automotive or construction heavy-duty, it works but it's not built for continuous production-line use — the high-grade plastic housing handles drops better than you'd expect but the trigger switch is the typical weak point on these.