30W High Power Drone Signal Jammer - Vehicle Mounted Frequency Blocker for Convoys Protection

We've been shipping the VJ8 for over three years now, and most buyers go with this model precisely because of that it covers that tricky 700MHz to 6000MHz sweep — the 160W total output is actually 20W per each of the eight bands, and you can toggle bands individually if you don't need to block everything at once, but for convoy protection you'll probably want them all on anyway.

It's bolted into a vehicle in about twenty minutes or so — no permanent modification needed, just DC 12V or 24V hookup — and the omni-directional antenna handles GPS, 2G/3G/4G, WiFi, Bluetooth, and VHF/UHF without breaking a sweat, though don't expect it to work well against military-grade encrypted frequencies above 6GHz because that's outside this unit's design scope.

Operating temp range is -20°C to +60°C, and the advanced cooling system isn't marketing fluff — we've tested one running continuous for 8 hours in a desert enviornment and it didn't throttle, but that was a dry day so humidity above 90% might shorten sustained run time (usually fine though, 5-95% is the rated spec).

The remote control is wired only for local or remote operation; you lose wireless control at about 5 meters or so, which is a limitation we don't hide because it's a jammer after all — CE and RoHS compliant, and we include a COA with each unit, though HPLC data isn't relevant here since we're dealing with RF hardware not chemicals.

We typically stock these in quantities of 10 units or so, lead time is roughly 4-6 weeks if we're out, and the weight is 10kg with dimensoins 460×330×70mm — MOQ is one piece for standdard orders, and packaing is a rugged flight case that doubles as storage for the antenna kit.