Account
Inquiry
24 antennas across a 20MHz to 6GHz sweep gives you 1W per band, total output sits at 24W, and the effective radius runs 2 to 30 meters depending on local signal strength—basically, you’re covering 2G through 5G, WiFi bands at 2.4 and 5GHz, GPS across L1 through L5, plus UHF/VHF and those 315/433/868MHz RF frequencies. The dual-band design on channels 12/13 and 16/17 is what eliminates mutual interference between those close-spaced frequencies, so you don’t get the cross-talk that plagues cheaper units.
We’ve seen these used mostly for controlled environments where you need selective band jamming—think secure meeting rooms or temporary exclusion zones—and the LCD battery/voltge/current monitor lets you track draw in real time, which matters when you’re running 100 minutes off a 7.4V/12000mAh Li-ion pack. The three fans and alumnum heatsink keep thermal runaway in check during extended operation, but don’t expect it to handle continuous duty beyond that runtime without a recharge cycle.
Most buyers go with the 24W model for the headroom, though the 1W-per-band limit means you’re not overpowering a tower at 30 meters if the carrier signal is strong—it’s better than teh 10W units for this, but you still need line-of-sight for the upper range. The net weight is 1.8kg without antennas, which is portable but not pocketable, and the 200×133×66mm footprint fits in a standerd backpack.
Supply runs about 20 units or so per batch form our main line, and we usually have stock, but confirm lead time if you need more than 50—MOQ is typically 1 unit for evaluation, though we’ll negotiate for larger orders. The warranty is one year, and our company provide a COA on request, but the cooling system’s fan bearings are a known wear point after 18 months of heavy use, so factor that in for field deployments.
The 30m range is the max under ideal conditions with weak signals nearby. In strong 5G zones, you'll see closer to 2-10 meters depending on how close you are to a tower.
Yes, roughly 100 minutes with all bands running. If you selectively jam fewer bands, you can stretch that time a bit more.
We can provide a basic factory test report showing output power per band. For full third-party certifications like FCC or CE, that would depend on your country's requirements — contact us to check.
MOQ is 1 unit for sample orders, and 10 units for bulk. Lead time is around 5-7 business days for samples, 15-20 days for larger orders after payment.
Yes, we can adjust the band selection before shipping — just tell us which frequencies you need to block. Adding bands outside the 20MHz-6GHz range isn't possible with this module.
