Account
Inquiry
We've been shipping these units for about 18 months now, and the failure rate on the X-ray generator is under 0.5% base on our internal tracking — that's better than most imported assemblies we've tested. The CE documentation is solid, and we can provide the full technical file if your compliance team needs to audit it before purchase.
70kV tube voltage with a 0.7mm focal spot gives you decent intraoral imaging at typical exposure times, though it's not suited for CBCT or any volumetric scanning. The half-value layer at 70kVp is 1.6mm Al, which meets IEC standerds for dental equiment, and the inherent filter is 2.1mm Al — so you're not adding external filtration for most protocols.
Focus is 0.7mm, anodic angle is 19 degrees, and the load cycle runs at 1/60 — basically fine for single-shot periapical work but don't expect it to handle back-to-back exposures in a busy clinic without a cooldown period. Leakage radiation at 1m range is under 0.007mGy/h, so you won't need special shielding in most rooms.
We usually have these in stock, but confirm lead time for a full container load — MOQ is 10 units for the standard steel housing, and payment terms are typically 30% deposit with the balance before shipment. We can arrange a pre-shipment inspection if your procurement policy requires it, and the COA for the X-ray tube assembly is included with every unit.
The balance arm is French-sourced, which makes positioning smoother than the Chinese knockoffs you'll find at half the price — but the tradeoff is the arm adds about 2kg to the total weight, so wall mounting requires solid concrete or reinforced studs. We include a mounting template and the necesary bolts, but check your wall composition before ordering.
Payment via T/T is standard, but we can do L/C at sight for established buyers with a good credit history — just give us 10 days or so to process the letter of credit documentation. Shiping is typically FOB Shenzhen, and we'll send you the packing list and bill of lading within 48 hours of departure.
Our MOQ for the YJ-DXP54 is typically 10 units per order. If you need less, let us know and we can check stock availability.
Standard lead time is 15-20 working days after order confirmation and payment. For larger orders, we may need a bit more time.
Yes, the YJ-DXP54 is CE certified. We can also provide a test report for the half-value layer and leaking radiation rate if needed.
The 0.7mm focus gives you sharper images with less blurring, which is important for detecting small issues in dental X-rays. It’s a solid spec for intraoral imaging.
The YJ-DXP54 is fixed at 70kv tube voltage, so we don’t offer voltage customization. However, it’s optimized for that spec to ensure consistent performance and compliance.
