Account
Inquiry
If you're maintaining clean-in-place loops in dairy or pharma, you've probably seen turbulence patterns that trap product or harbor biofilm—this tee eliminates that with a mirror finish internally that we hold to Ra 0.4μm or better, and it's basically same geometry whether you spec 1/2" or 10".
316L is what most buyers go with for biotech because of teh lower carbon content (check your batch though), while 304 handles most food-grade appliction just fine, and we do both with material traceability on the COA.
The pressure rating is 10 bar max, so it's not suited for high-pressure steam lines or anything above 150°C continuous—just a fact of the standerd sanitary design.
What it does is fit into welded lines with zero dead legs, and we also offer clamped or threaded ends if your crew prefers modular teardowns (usually quicker on retrofit jobs).
We run 100% dimensional checks and surface finish measurement on every piece, so if you're auditing to 3A or BPE, the paperwork lines up without you having to chase down mill certs.
Anyway, we usually stock DN25 to DN100 in 316L for 20 days or so, but confirm lead time on DN10 or if you need the full ISO set for a new line build.
Our MOQ for the JN-FT 6007 is typically 50 pieces per size and material, but we can adjust for custom orders. Just let us know your volume.
Standard orders usually ship within 15-20 working days after order confirmation, depending on size and quantity. We can expedite if you need it faster.
Yes, every JN-FT 6007 comes with full material traceability certificates and FDA compliance documentation. We also do 100% material verification on all batches.
Absolutely, the JN-FT 6007 is available in clamped, threaded, and union connections too. Just specify your preference when ordering.
We pack each fitting in bubble wrap or foam, then box them securely for export. For larger orders, we use wooden crates to prevent any surface scratches during transit.
