High Quality Ceramic Brake Pads Manufacturer - OEM Custom Brake Pads for Multiple Car Models

Your custoemr is swapping pads on a late-model sedan that spends equal time in stop-and-go traffic and mountain grades, so they need something that won't fade after the third switchback—that's where the ceramic fiber matrix with aramid reinforcement comes in, holding the friction coefficient between 0.38 and 0.42 across the entire 600°C to 800°C operating window.

our company can run this specific D668 platform as a custom OEM batch, and what matters is you're not locked into one formula; we've got semi-metallic, low-metallic, non-asbestos, and full ceramic blends available depending on whether your client prioritizes dust reduction, rotor wear, or initial bite.

Shear strength sits at 3.4 MPa on average, but that number varies slightly with chosen compound—ceramic tends to edge higher here than the low-metallic versions, though both beat the standard aftermarket stuff you'd pull off a parts store shelf.

MOQ is 100 sets per SKU, which is basically a single production run for us, and we'll apply your spec-required color coating and package them as four-piece sets with the backing plates already shimmed for noise dampening—most buyers don't realize the backing plate prep is where the real quality variance hides.

We've got ISO9001, TS16949, 3C, and ECER90 certs on file, and every batch ships with a COA covering friction testing and shear strength—usually stock teh D668 die for quick turnaround, but confirm lead time if you need a formula we haven't run in the last 30 days or so.

The warranty range of 30,000 to 60,000 km is a ballpark figure base on standdard passenger car duty cycles—don't quote that for heavy fleet use or track application, because sustained thermal cycling above 750°C will compress that lifespan noticeably.