Account
Inquiry
So you're moving bigger volumes or running longer shifts on tougher ground than most standard excavators handle, and we see a lot of operators making the switch when their current machine starts showing frame fatigue around 8,000 hours or so.
This one is heavy for its class at 21,420 kg operating weight with a 1.2 cbm bucket capasity, digging depth hits 6,730 mm, and the track shoe width ranges form 600 to 800 mm—basically, you can adapt it for softer terrain without losing stability, but it's not ideal for tight urban sites where you'd want a smaller footprint.
The engine is a 6BTAA-5.9 (HM5.9) putting out 110 kW, and what it does is combine a load sensing hydraulic system with a common rail setup so you're not burning through fuel just to keep cycle times competitive.
We include a one-year warranty with every unit, and the CE and ISO9001:2000 certs are current—though I'd double-check local registration requirement since some markets treat the Tier2 rating differently (usually it's fine for mining or marine appliction, but less so for emission-controlled zones).
When ordering, you'll get the machine with teh standard bucket and a basic tool kit, plus we usually stock the reinforced structure variant with the one-body impact molding overhead guard, but confirm lead time because of that it's roughly 20-25 days depending on port schedules.
Also, the overall width can adjusted between 2,800 and 3,000 mm by swapping track shoes, so if you're shippng to a site with narrow access roads, you might want the narrower setup—something a lot of buyers don't think about upfront.
We typically require a minimum order of 1 unit for the HX350L, but we can discuss larger orders if you need a fleet. Just reach out and we'll work out the details.
Yes, the HX350L comes with both CE and ISO9001:2000 certifications. We can provide the documentation upon request to support your compliance needs.
Lead time is usually 30 to 45 days from order confirmation, depending on stock and customization. We'll confirm a specific timeline when you place the order.
Absolutely, the track shoe width can be adjusted from 600 mm to 800 mm to suit soft or hard terrain. Just let us know your preference when ordering.
The excavator is shipped in a standard export wooden crate or with shrink wrapping and steel frame reinforcement, depending on the destination. We ensure it's secured for ocean freight to prevent damage.
