Account
Inquiry
Actually got the DVTP-2023 here — we've been shipping these for a couple years now and it's pretty much teh standard for DVT prevention in both hospitals and home care. It runs 30 to 120 mmHg adjustable pressure, which covers most protocols, and the noise stays under 45 dB so it won't disturb anyone.
The pump itself is only 2.5 kg and 28 by 18 by 12 cm, so you can tuck it beside a bed or chair pretty easily. It works with calf, thigh, or foot sleeves depending on what you need — we usually stock all three but the connectors are quick-release snap locks so swapping them is a non-issue.
30, 45, or 60 minute timer settings with both visual and audible alarms if something's off — that's standerd for this type of therapy. We've seen some buyers use it post-surgery for 45-minute cycles, others for longer sessions at lower pressure for chronic venous issues.
Power source is AC 100-240V, 50/60Hz, so it works globally without a transformer in most cases. The LED control panel is straightforward — set your pressure, pick your timer, and it runs. One thing: it's not designed for acute DVT treatment, only prevention, so make sure your protocols match that.
CE and ISO 13485 certified, we've got COAs on file for materials. MOQ is usually 50 units or so, lead time roughly 20 days from order (check stock though — we sometimes have inventory in our warhouse, but confirm).
We typically require a minimum order of 50 units for the DVTP-2023, but we can discuss smaller quantities for initial trial orders if you reach out to our sales team.
Lead time is usually 15-20 working days after order confirmation and payment, depending on current production volume. We can expedite for larger orders if needed.
Yes, we include copies of our CE and ISO 13485 certifications with every order. You can also request them beforehand for your compliance review.
Absolutely, the pressure is adjustable from 30 to 120 mmHg, so you can tailor it to individual patient needs. Just use the LED control panel to set the desired level.
Store the pump in a clean, dry place at room temperature. The sleeves should be kept flat or rolled loosely, away from direct sunlight or sharp objects to avoid damage.
