Account
Inquiry
We're looking at a stationary cryolipolysis unit that runs on semiconductor cooling with medical-grade silicone pads—the 12-inch touch screen makes programming treatment cycles pretty straightforward once you've got your protocols dialed in.
For clinics doing high-volume body contouring, the ability to run up to four handles simultaneously cuts session times significantly, and the adjustable cooling range from 5°C down to -16°C gives you flexibility for different fat densities and patient tolerances.
The handles come in five sizes from mini at 7.5×3×6.8cm up to large at 25×12×8.2cm, so you've got options for smaller areas like the chin or larger zones like teh abdomen, and the applicator life is rated at over 1 million shots—roughly 2-3 years of steady use depending on your case load.
It's not really suited for mobile setups since the unit draws 1800W and needs a dedicated power supply, and the 13L water cooling system means you'll need to check water level weekly—something a lot of buyers don't think to ask about until the machine throws an error.
Most buyers go with the 15mm or 25m transmitters for general body work, and we usually have stock on those, but confirm lead time for the 6mm or 39mm heads if you need something specific for small or large treatment areas.
We include a two-year limited warranty, and the COA covers the cooling performnce specs at 5°C to -16°C with vacuum presure up to 110KPa—basically, it's better than some entry-level units that top out at -10°C and struggle with consistent output across all four handles.
We typically require a minimum order of 1 unit for initial orders, but we can discuss larger quantities if you need bulk pricing. Just let us know your volume.
The machine comes with CE and RoHS certification, plus a detailed test report. We can provide these documents upon request before shipment.
Yes, you can adjust the cooling output from 5°C down to -16°C directly on the 12-inch touch screen. The system uses semiconductor cooling with medical silicone pads for precise control.
Lead time is usually 7-15 working days after order confirmation. The machine is packed in a sturdy wooden crate with foam padding to protect the touch screen and handles during transit.
The two-year limited warranty covers the main unit, cooling system, and touch screen, but the medical silicone pads and applicators are consumables with a 6-month warranty. The handles have a lifecycle of over 1 million shots, so they last a good while.
