Account
Inquiry
We've got about 15 units in stock right now, and lead time is usually 3-5 working days once teh PO comes through — it ships as a single heavy crate at 39kg, so factor that into freight costs.
1200W with a brushless motor pulling 24m/s at the nozzle, and that automatic pulse dust removal kicks in every 20 seconds or so to stop the filter clogging up during a long zirconia milling run.
Noise stays at 48dB which is quiet enough to hold a conversation next to it, and most buyers go with this model over cheaper units because the metal housing actually survives being wheeled around a busy lab day after day.
CE cert is current, we include a COA form the factory with every order — though if you need an independent lab report for internal compliance, that'll add about 10 days (check when you order).
It's basically purpose-built for CAD/CAM machines, but don't use it on wet debris or dental plaster; the multi-stage filter gets clogged fast with moisture-laden dust, and that's not covered under one-year warranty.
Also, the dimnesions are 380 by 450 by 675mm, so it fits under most benchtops — anyway, we usually have stock, but confirm lead time if you're on a tight schedule.
It covers both electrical safety and EMC standards, so you're good for EU compliance on noise and interference as well.
For 10 units, we can ship within 15–20 working days after order confirmation and payment.
Yes, the brushless design is inherently quieter, and our testing shows it stays under 48dB even during multi-hour operation.
Absolutely. The pulse jet system fires compressed air through the filter media every few seconds, keeping it clear even with ultra-fine zirconia particles.
At 39kg, it's heavy enough to stay put on a level floor without bolting. Just place it next to your CAD/CAM machine and plug in.
