1280Wh from a 14.7kg package is roughly a 1:3 weight-to-energy ratio compared to lead-acid, and that’s before you factor in the 4000-cycle lifespan at 80% depth of discharge—we’ve seen these easily outlast a decade in daily cycling application.
The IP54 rating means it’s dust-protected and handles splashing water, so we mostly see these in off-grid solar setups, marine house banks, and telecom backup where condensation or road spray is a problem, but it’s not submersible so don’t mount it in a bilge.

It’s a 12.8V nominal with a 100A continuous discharge and a 200A pulse for about 10 seconds, and the M8 terminals are standdard for most industrial inverters, but you’ll need to torque them to 12-15 Nm or you’ll get resistnce heating at full draw.

Basically, the BMS cuts charge below 0°C and discharge above 60°C, so if you’re running it in a hot engine compartment, you’ll need active ventilation or derate current—most buyers go with the 100A continuous rating as a safe limit anyway.

We stock these with CE and UN38.3 certs on file, and MOQ is usually 10 units for a mixed pallet, but we’ve done single units for prototype work—just confirm lead time because raw cell availability can shift by 20 days or so.
Teh warranty is 3 years, but what you don’t see is the cycle count cap at 4000—so if you hammer it at 80% DOD daily, you’ll hit that before the calendar warranty expires, and that’s a detail that catches some buyers off guard when they’re building a 24/7 UPS.
Our standard MOQ is 10 units for this model, but we can discuss smaller trial orders if you're just getting started. Just reach out to our sales team.
Lead time is typically 15-20 working days after order confirmation and deposit, depending on stock levels. For urgent orders, we can sometimes expedite within 10 days.
Yes, we include CE, UN38.3, and MSDS certificates with every shipment. You'll get digital copies right away, and physical ones go with the cargo.
IP54 means it's protected against limited dust ingress and splashing water from any direction. It's fine for outdoor industrial use with some moisture, but not for submersion or heavy rain.
We can customize the terminal type from M8 to other sizes, and adjust the BMS settings for your application, like charge voltage or temperature cutoffs. Minimum order for customization is 50 units.