Account
Inquiry
30 Nm of torque is what actually moves the screw through hardwood without stripping it, and we've tuned these brush motors to hit that consistently even under load.
It goes from 0 up to 28,000 blows per minute which is basically a jackhammer for screws, and the no-load speed tops out at 4800 RPM for drilling steel or wood — you can dial it down with the variable trigger, obviously.
The 2.0Ah battery charges in about 60 minutes (check lead time for spares), and the whole package weighs 1.5kg without the battery so it's not too heavy for overhead work, but honestly the rubberized grip matters more for fatigue than the weight does.
Most buyers go with the 12V version for lighter DIY jobs, but if you're driving lag bolts into framing or doing metal fabrication, the 24V setup is better than the standerd 12V for sustained torque without bogging down.
We usually have stock on these, but confirm lead time if you need more than 50 units or so — the carry case comes with drill bits included, and the chuck goes form 1.5mm to 13mm so it'll take pretty much any bit you throw at it.
Anyway, it's not suited for concrete drilling without a hammer function, so stick to wood and steel, and teh CE and RoHS certifications are on COA with each shipment.
In steel you can drill up to 10mm, and in wood up to 50mm. That covers most standard DIY and construction fasteners.
The 2.0Ah lithium-ion battery charges fully in about 60 minutes. That gives you solid runtime for typical drilling and driving tasks.
It's CE and RoHS certified, so it meets European safety and environmental standards. You can confidently use it on job sites that require compliance.
Yes, the chuck adjusts from 1.5mm to 13mm, so it works with standard hex and round shank bits. The package also includes a starter set of drill bits.
For wholesale orders, we typically require a minimum of 100 units per model. Lead time is around 15-20 days after order confirmation.
