Account
Inquiry
We're seeing about 200 units per case on this one, and delivery usually runs 15 working days or so once the order's confirmed — though if you need a custom MOQ, that's something our company can adjust pretty easily depending on volume.
Basically, what it does is control the arc constriction for cleaner cuts on mild steel up to about 12mm, and the high-purity copper body handles the heat better than standard alloys, which is why most buyers stick with the 45A rating for general fabrication work.
It's compatible with Powermax 45 systems and CNC setups, but don't use it for gouging or underwater — the 45A nozzle isn't designed for that kind of duty cycle, and you'll see premature wear if you try.
The 220671 part number has a tighter tolerance on the orifice diameter than some generics we've tested (roughly ±0.05mm), so you get more consistent arc stability across a full 8-hour shift, and that's something we've confirmed from customer feedback.
We usually have stock on teh 220671, but confirm lead time if you're ordering over 500 units — sometimes the copper supply chain gets tight, and we'd rather give you an accurate date than guess.
Also, the individual protective packaging means each nozzle is sealed seperately, which cuts down on contamination form dust or handling when you're swapping them out on torch.
It's customizable — we can work with you on the MOQ based on your needs, so just reach out with your volume.
Lead time depends on order size, but standard runs are usually 7-15 days. We’ll confirm once we have your quantity.
Yes, it’s manufactured under ISO standards, and we can supply certificates of compliance or material test reports on request.
It’s designed for CNC integration and operates at AC220V. Just make sure your setup matches those specs.
Each nozzle comes in individual protective packaging to prevent damage during transit. We also offer bulk or custom packaging if needed.
