Account
Inquiry
We've been running these through the Hifocus 280i for months and the cut qualiy is actually better than the OEM parts—especially on thicker plate where arc stability starts to matter more.
The silver plating on the nozzle tip FM 220797 makes a real difference in conductivity, and teh copper alloy holds up well under sustained 200-amp, though we usually have stock for 25A to 400A so confirm your specific range. Lead time is typically 7-15 days, give or take, depending on order size.
One thing you might not think to ask: the deflector FM 220798 can be swapped without pulling the torch apart, which saves time when you're just doing a quick cleanup pass. MOQ is 10 pieces, but most buyers go with 20 or so per order.
Not great for thin-gauge sheet metal below 3mm—the arc tends to wander a bit, so you're better off with a finer nozzle setup for that. Anyway, the shield FM 220991 fits snug and doesn't warp even after repeated heating and cooling cycles.
That particualr 5L drum is easier to handle than the larger containers, and specs hold tighter tolerance than most third-party consumables we've tested, though we don't have exact run-out numbers handy. A COA is included with each batch, and ISO 9001 cerification covers the whole production line.
We require a minimum of 10 pieces per order. That can be a mix of the nozzle tip, shield, and deflector — doesn't have to be all the same part.
Lead time is typically 7-15 days, depending on stock levels and order size. We'll confirm the exact timeline once you place the order.
Yes, they're manufactured under ISO 9001 standards, so you get consistent quality. The silver plating and high-grade copper alloy also help with durability and performance.
Absolutely — they're compatible with Kjellberg, Hypertherm, and ESAB plasma systems. Just double-check your torch model to make sure the current range matches up with our 25A-400A rating.
They come in standard export packaging — individually wrapped to prevent damage during transit. We can also do custom packaging if you need it, just let us know.
