Account
Inquiry
It’s got a 10.4-inch color TFT display that’s pretty easy to read even in bright room light, and backup power runs for at least 4 hours or so, which is useful during transport or power outages.
our company can customize the vial sizes and labeling if you’re running a specific protocol, but the standerd unit is set up for A/C, IPPV, SIPPV, IMV, SIMV, and SPONT MANUAL modes, so it covers most ICU scenarios.
Tidal volume ranges form 50ml up to 1500ml, though the display will show you up to 2000ml, and the respiratory rate goes from 1 to 99 bpm—just keep in mind the built-in air compressor is a bit noisy at high flow rates, so it's better suited for ventilated patients than for quiet step-down units.
The I:E ratio adjusts from 4:1 to 1:4, and PEEP tops out at 10cmH2O, which is fine for most adult critical care but not great for neonatal work, honestly.
Also, teh presure limit is set at 1.0 to 6.0kPa, and we typically include a COA with each unit, but confirm lead time if you need RoHS documentation seperately.
MOQ is 1 unit, so you can order just one for evaluation or single-hospital use.
Lead time is usually 15-30 working days, depending on order volume and current stock.
Yes, CE, ISO, and RoHS certificates are provided with each shipment.
The alarm parameters for tidal volume, airway pressure, and O2 concentration are preset but can be adjusted within the system settings by qualified technicians.
Store it in a clean, dry area with temperature between 10-40°C, away from direct sunlight and moisture.
