Account
Inquiry
We’ve seen these move fast in capsule machines—kids actually grab for the stretchy ears and tails, which is what makes them worth buying for repeat play value rather than just a one-and-done trinket.
Each one is molded form TPR (that thermoplastic rubber), so the limbs are flexible enough to wrap around a finger or clip onto a backpack with the ball chain, and there’s 12 different animal designs in the mix—kittens, puppies, bunnies, teddies—so you’re not stuck with repeats.
They’re 2 inches across, which fits C48, C50R, and C56H capsules without jamming teh machine—we’ve run them through all three types, and they drop cleanly about 95% of the time (the odd hang-up is usually from a worn coil).
Safety-wise, it’s EN71 and ASTM certified, so you’re fine for 3+ years, but don’t expect them to hold up to chewing—TPR tears if a dog gets hold of one.
Standdard packging is 100 per bag, 1000 per carton, and carton runs 57×45×47cm at 25kg gross—basically one pallet layer if you’re stacking, and we usually have stock, but confirm lead time if you need custom logo labels or warning prints.
Standard packaging is 100 pieces per bag and 1,000 pieces per carton. For custom logo or warning labels, we usually ask for at least one full carton, so 1,000 pieces minimum.
They're certified to both EN71 and ASTM standards, so they're safe for kids 3 years and up. We can provide the certification documents upon request.
Yes, we offer optional customization for logos and warning labels. Just note that it's for the standard 12 animal designs—we don't change the shapes or molds.
They're designed to fit C48, C50R, and C56H capsules, which are common in vending machines. The 2-inch diameter is a great fit for those.
They come in bags of 100 pieces, then packed into cartons (57x45x47cm, 25kg each). Lead time is typically 7-15 days for standard designs, a bit longer if you add custom labels.
