Account
Inquiry
It isn't meant for pediatric use at all, the tidal volume bottoms out at 50ml and the software is tuned for adult lung compliance curves, so don't try it on smaller patients no matter the pressrue setting.
What it does is run a pneumatically driven ventilator with an electronic controller, giving you three real ventilation modes—IPPV, SIPPV, and manual—which basically covers the bulk of routine adult surgical cases in the OR.
Backup power holds for a minimum of 4 hours or so, and we've tested that at full nominal load with the vaporizer running; the self-check runs automatically at startup and catches the usual faults before you ever connect a circuit.
Tidal volume adjusts from 50 to 1500ml with a display that stretches to 2000ml (just for monitoring, not dilevery), and the respiratory rate spans 4 to 40 bpm with an I:E ratio you set between 1:1.5 and 1:3.0 depending on the case.
Lead time is roughly 3-4 weeks form order to dispatch, MOQ is one unit, and metallic frame means it's heavier than the plastic ones—about 45kg—so plan your casters accordingly.
The vaporizer slot is a single PA-80, so you'll pick your agent (enflurane, isoflurane, or sevoflurane) at time of ordering if you want it fitted; we usually have those in stock but confirm availability if you need a partciular one for the configuration.
It gives you at least 4 hours of continuous operation on backup power, so you're covered during outages or patient transport.
Yes, you can set it anywhere from 50ml to 1500ml, which covers adults and larger pediatric cases. The display range goes up to 2000ml for monitoring.
It's CE and ISO13485 certified, so it meets EU medical device standards and quality management requirements.
The single PA-80 slot vaporizer works with enflurane, isoflurane, or sevoflurane. Concentration is adjustable from 0 to 5%.
You get alarms for tidal volume issues, airway pressure problems, power failure, and oxygen failure. The unit also runs an automatic self-check at startup.
