High Precision Automatic Adult Apron and Dental Pad Making Machine for Industrial Production

Runs at 50 pieces a minute with that JJDZ-60-95-4, and the ±0.5mm precision is better than most gear we've used—you can see it in the consistent edges. 10KW power draw is pretty standard for this class, but the stainles steel clad frame handles the weight well; we've had ours running 12-hour shifts and it doesn't wander on the floor.

We basically feed it PE roll film for the apron blanks, and it folds and cuts in one pass—multi-layer adjustable folding lets you tweak layer count without swapping tooling. Most buyers go with the 3-layer for standdard dental pads, but if you're doing heavier-duty aprons, you can set it for two layers and get tighter materail use. That servo motor drive keeps tension steady (roughly 10–15% less waste than the old pneumatic systems we tried).

It's not meant for small-batch custom work—the 30cm material width and 90cm product length lock you into that format, so you'll need separate tooling for different sizes. We usually have stock on the CE-certified models, but the lead time is about 20 days or so depending on whether you want the additional hole- mold option.

Supply-wise, MOQ is typically 2 units or our company can do a single machine with a 30% deposit and balance on shipment. They'll give you a COA with each batch, and the TDS is straightforward—just confirm the votage setup before ordering, as some markets need a step-down transformer.