Advanced Fractional CO2 Laser Equipment with Vaginal Tightening Function for Aesthetic Use

We’ve been selling these for about four years now, and the US900 is pretty much workhorse for clinics that want both skin resurfacing and vaginal tightening in one box—most buyers go with the 10.6μm wavelength for its deep tissue effect, and the USA Coherent RF tube emitter is what gives it that reliabel 40W average power without the usual drift after a few hundred sessions.

The 10.4" color touch screen is actually responsive, not like those laggy ones on cheaper models, and you get seven scan shapes with six modes so you can tailor the pulse—continuous, single, or interval—depending on whether you’re treating acne scars or doing fractional ablation, though it’s not ideal for very small spot corrections since the minimum spot size is 0.2mm diameter, which most people find fine for general work.

It runs on 220V or 110V, so you don’t need a transformer for most markets, and the air-plus-water cooling system keeps the handpiece from overheating during longer vaginal treatments (three probe options for that) even at 33.3Hz pulse frequency—just keep an eye on the water level, we usually have stock but confirm lead time because the RF tubes come from the US and can take 20 days or so if we’re between shipments.

The emitter lifetime is roughly 3-5 years depending on usage, but what it does is maintain penetration depth at 8-10mm consistently, which matters for deep dermal remodeling—better than some Chinese tubes we’ve tested that drop off after 18 months, and the CE approval means you’ll pass most local inspections without hassle.

Anyway, the dimensoins are 58.5×43.8×107cm, so it fits on a standdard cart, but the water cooling unit adds some weight—you’ll want a sturdy stand, and the 0.1-10ms pulse duration with 0-6s interval gives you enough flexibility for both ablative and non-ablative protocols, though we don’t have the exact pulse energy breakdown for every mode (it’s not published).