Account
Inquiry
Polyester plush fabric with a 100% PP cotton fill density around 180-220 g/m² gives these toys a consistent compression resistnce that holds up through repeated handling, and that fill ratio is what prevents clumping after a few wash cycles—something most buyers don’t test until it’s too late.
We run a standard drop test from 1.2 meters onto concrete for every batch, and the seam strength typically holds above 18 N/cm on teh main body seams, which is better than what you’ll get form most general toy suppliers who skip that check.
Custom MOQ sits at 500 pieces for OEM orders, and we usually have stock samples of rabbit design in gray and pink ready in 3-5 working days, but custom samples take 7-10 working days depending on how many revisions you need on the 3D model.
The PP cotton we use has a flame retardant treatment that meets EN71-2 standard, though it’s not suited for direct food contact appliction obviously, and our company can provide the COA for each lot if you request it at order time.
Payment terms are T/T or L/C for larger volumes, and we’ve shipped to about 30 countries so far, but lead time for a full production run of 5000 pieces is roughly 25-30 working days—confirm before ordering because raw fabric availability can shift.
The MOQ for custom orders is 500 pieces. This applies to any design with your logo or custom size.
Yes, we offer stock samples in 3-5 working days and custom samples in 7-10 working days. Just let us know which one you need.
We can provide material safety and compliance documents like EN71 or ASTM if required. Just specify what you need when ordering.
Standard packaging is 1 piece per OPP bag, but we also offer custom packaging like polybags or branded boxes. Let us know your preference.
Lead time depends on the order size and complexity, but typically 15-25 working days after sample approval. We'll confirm once we see your design.
