Account
Inquiry
The main thing you need to know upfront is that the wire stripper range tops out at 5.0mm diameter or 10.0mm² cross section—so if your team regularly works with heavier gauge cable, this isn't the right tool for that job, but for standard electrical maintenance up to that limit it's actually a solid fit.
We're ordering these specifically for the combination and wire stripper variants in the 6-inch size because that's what field crews requested, and the box joint construction with drop forged 60Cr-V steel means they should hold up better than the cheap stamped ones we tried last quarter. Hardness is spec'd at 58-62HRC which is tighter tolerance than most budget options we've seen, and they're EN60900 compliant so you don't have to worry about the safety paperwork for sites that require it.
Handle material is TPE plastic with an ergonomic grip design—nothing fancy but it's less slippery than the standard PVC handles when your hands are sweaty or slightly oily. Tempearture range is -25°C to 70°C, which basically covers any indoor or outdoor work we do around here, and they come in polished, nickel plated, or pearl-nickel plated finishes (we usually go with nickel plated for corrosion resistnce, but check if your guys prefer something else).
The supplier has been consistent with COAs on past orders—they include batch-specific hardness test results and the EN60900 compliance certificate, which saves us from chasing documentation later. I'd give you the exact lead time but it varies by finish and quantity; for the 6-inch combination and wire stripper models in nickel plated, we're looking at roughly 20 business days or so.
Payment terms are net 30 after approval of the proforma invoice, which is standard for this suplier, and the MOQ per variant is 50 units—so for a mixed order of combination and wire stripper pliers you're looking at 100 pieces minimum. Also, the packaging is individual poly bags with a header card, nothing special but it keeps them from scratching each other in transit.
Anyway, one detail you might not think to ask: the pearl-nickel finish looks nicer but it's noticeably more slippery in the hand than the regular nickel plated version, so for actual use work I'd stick with the standard nickel or polished unless you want a display-grade tool.
Our MOQ for bulk orders is typically 500 pieces per size and finish combination, but we can negotiate for mixed batches if you're flexible. Just reach out with your target quantity and we'll see what works.
Yes, we provide a compliance certificate for EN60900 with every bulk order, confirming the insulation and safety standards. It's included in the shipping documents unless you request a specific format ahead of time.
Absolutely, all three finishes—polished, nickel plated, and pearl-nickel plated—are available for the 6-inch size. Just specify your preference in the order, and we'll handle the rest.
For a standard order of 1,000 pieces, lead time is about 25-30 days from confirmation, including production and heat treatment. Rush options are possible if we have stock on the raw 60Cr-V steel.
Store them in a dry environment within the -25°C to 70°C range to avoid rust or handle damage. The TPE grip holds up fine in normal conditions, but keep them away from solvents or direct sunlight for long-term storage.
