Account
Inquiry
We've had customers in small job shops running this for years, and what they all say is the same thing — it handles that 500mm swing over bed without breaking a sweat, even when you're pushing it on a 3000mm workpiece.
Spindle goes form 9 to 1600 RPM with a 52mm hole through it, and the MT6 taper means you're not swapping tooling every five minutes. Processing precision sits at 0.01 to 0.02mm, which is tighter than most manual lathes in this class, and the 7.5kW motor gives you enough grunt for heavy cuts on steel. The lead screw pitch is 12mm, so thread is pretty straightforward.
Basically, you're looking at open-loop control here, so it's not going to hold your hand like a full CNC, but for turning cylindrical and conical surfaces or metric threads, it's more than adequate. One thing though — teh net weight is 2700kg, so you'll need a solid floor and a forklift to get it in place, no way around that. It's better suited for than one-off prototypes, honestly.
SGS certified, 1-year warranty, and we usually have stock, but confirm lead time (check with us first — sometimes it's 20 days or so). Most buyers go with the standerd package, and tailstock quill diameter is 75mm, which matters more than you'd think for long shaft work.
It means the lathe can hold tolerances within 0.01 to 0.02 millimeters, which is typical for general precision turning. If you need tighter tolerances than that, this might not be the right fit.
Typically, MOQ is 1 unit, and lead time is about 30-45 days depending on stock levels. We can give you a more exact timeline once you confirm the order.
The SGS certification covers the machine's design and manufacturing quality, not your production process. It confirms the lathe meets international safety and performance standards.
Yes, the spindle hole diameter is 52mm, so you can only pass bar stock up to about 50mm in diameter through it. Anything larger will need to be chucked.
The machine is packed in a reinforced wooden crate with foam padding to protect all surfaces. Store it in a dry, covered area to avoid rust, especially since it's a big 2700kg unit.
