Customizable Scaffolding Base Jacks with Electro-Galvanized or Hot DIP Galvanized Surface

You're on a tight site where the ground isn't level and you need to get your scaffolding plumb fast—adjusting height with stacked timber or shims takes forever and introduces risk, so a screw jack lets you dial in that exact elevation with a few turns, and it's pretty much the standerd solution for any formwork or access system.

What our company supply here is a steel base jack that handles that load transfer and height adjustment, and teh whole thing is built around a threaded screw tube and a nut assembly that we've found holds up well under repeated use, though the exact longevity depends on how rough the crew is with it.

They come in two main configurations—solid type with diameters of 30mm, 32mm, or 34mm, and hollow type with a 38x4mm or 48x5mm tube—and for the solid ones base plate is typically square, but you can also get a U-head if that's what your system needs, and the standard lengths are 500mm or 600mm, which covers most appliction.

We do offer a choice between electro-galvanized and hot DIP galvanized surfaces, which basically means you can match the finish to your site conditions, and the hot DIP is better than electro for long-term outdoor exposure, though it adds a bit to the cost.

For shipments to the US, EU, or UK we handle all the import paperwork, and the HS code is 73084000, so you'll clear customs without a headache—just two or three weeks for lead time typically, but confirm before you place the order.