Account
Inquiry
We usually keep these in stock, but the 3000W units tend to move faster than the 1000W ones, so check lead time—typically 2-3 weeks if we're out, and shippng is via freight with a liftgate truck because crate is about 200kg or so.
It's basically a handheld fiber laser welder with a touchscreen, and what it does is let you weld stainles steel up to 7.5mm thick or aluminun up to 5mm in a single pass, which is better than most handheld units for thicker jobs.
The 5L drum is easier to handle for smaller shops, but the 20L one gives you a better per-liter cost if you're running production shifts, and we usually have both in stock, though the 20L can take 4-6 weeks if demand spikes.
You'll want the automatic wire feed system set for 0.8 to 1.6mm wire, and the swing function lets you adjust weld width form 1 to 5mm—that's a detail most buyers don't think about until they need to fill a gap on uneven material.
One thing it's not suited for is thin sheet metal under 1mm—the heat input is too high even at the lowest power setting, so you'd be better off with a pulsed laser for that kind of work, just a heads-up.
We've been selling these for about four years now, and the CE and ISO9001 certs are legit—we had a buyer send a third-party inspector to the factory once, and everything checked out, so you're not getting a rebranded toy.
Yes, the DA-LW Series comes in 1000W, 1500W, 2000W, and 3000W options. You can pick whichever power level fits your welding thickness needs.
Our MOQ is 1 unit for the DA-LW Series. We can handle small orders or bulk quantities depending on your needs.
Yes, we include both CE and ISO9001 certificates with the machine. You'll get the actual paperwork to verify compliance.
Standard lead time is 15-20 working days. For rush orders, we can sometimes expedite to around 10-12 days depending on stock.
It works with either AC220V or AC380V, so you can choose based on your shop's setup. Just let us know which voltage you need.
